Operating instructions

Controller with the OP7000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 115
Figure 80: Selection after programming
9. Select whether the new seam program should be mirrored for
the other side of the sewing material (mirror programmed side
to other side), the other side of the sewing material should be
programmed (program other side) or the programming should
be ended (finish).
10. Select the desired function.
 The selected function is indicated by an activated control
field.
11. Press the OK button.
 The seam program is saved. Depending on which function is
selected, different buttons are displayed:
 Pressing the Abort button closes the window, the AUTO
user interface is then displayed. All the data that were input
are deleted by this!
Function Button
Mirror programmed side to other side AUTO mode
Program other side PROGRAMMING-mode
Finish AUTO mode