Operating instructions

Controller with the OP7000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 113
8.7.2 Creating a new program (PROGRAMMING)
Prerequisite:
• Operating mode EDIT is displayed.
1. Press the P
NEW
button.
 The PROGRAMMING user interface is displayed. Pressing
the P button displays the number of the next free program
slot.
Figure 78: Programming mode PROGRAMMING
2. Press <No Name> and input a name.
Information for inputting text:  page 91.
If no name is input for the seam program, <No Name>
continues to be displayed.
 The first sewing step is displayed with its number in the left
pane.
3. Input all the parameters for the first sewing step.
4. Sew the first sewing step, or manually input the length of the
sewing step using the seam length measurement parameter.
5. Select the next sewing step, either by pressing on the number
of the first sewing steps or by using the knee switch.
 The second sewing step is displayed with its number in the
left pane.