Operating instructions

Controller with the OP7000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 109
1. Press the desired button.
 The user interface for setting the desired parameter is dis-
played.
For some parameters the setting is more than just a numerical
value. These extended parameters are described in detail below.
EDIT mode Setting the sewing material size
Figure 74: Setting the sewing material size parameter
The following information is displayed:
• The currently selected size is indicated by a double
arrow (>>).
• The sizes highlighted in red represent the reference sizes
for the graduation logic.
1. Press on the desired sewing material size.
 The EDIT user interface of the programming mode is dis-
played.