Operating instructions

Controller with the OP7000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 105
8.6.2 Sewing process
1. Select the seam program,  page 100.
 The program number and name of the seam program are
displayed on the user interface. If no name has been saved
for the seam program, <No Name> is displayed.
2. Select the right or left piece to be sewn.
3. Select the size of the piece to be sewn,  page 101.
4. Push the pedal forwards and sew the seam.
 The sewing progress is displayed graphically in the left pane
as a red bar.
Figure 72: Sewn sewing steps and sewing step in progress
 The remaining sewing length per sewing step is displayed.