Manualshelf

Operating instructions

ManualsBrandsDuerkopp Adler ManualsBusiness equipment650-16
101102103104105106107108109110
Controller with the OP7000 control panel
Operating Instructions 650-16 - 01.0 - 06/2014 101
AUTO mode Setting the sewing material size
Figure 68: Setting the sewing material size parameter
The following information is displayed:
• The currently selected size is indicated by a double
arrow (>>).
• The sizes highlighted in red represent the reference sizes
for the graduation logic.
1. Press on the desired sewing material size.
The user interface for the Automatic mode AUTO is dis-
played.