Operating instructions

Controller with the OP7000 control panel
Operating Instructions 650-16 - 01.0 - 06/201498
8.6 Automatic mode AUTO
Figure 66: Automatic mode AUTO
Header (1)
The AUTO operating mode is displayed. The buttons + F%
and - F% offer quick access for setting the fullness values in %.
Left pane (2)
The graphical representation of the entire seam, divided into the
number of programmed sewing steps, is displayed here. A red bar
with an arrowhead indicates the direction of sewing and progress
of the sewn seam.
Middle pane (3)
The number and the name of the selected seam program are
displayed here, together with the symbols for all the parameters
that can be set. The gray fields above the parameter symbols
show the respective current values.
Right pane (4)
Another user interface or another operating mode can be selected
here.
ཱ
ི
ཱི
཰