Operating instructions

About this operating instructions
Operating Instructions 650-16 - 01.0 - 06/20148
1.5 Liability
All information in this operating instructions was compiled with
consideration to the state of the art, and applicable standards and
regulations.
The manufacturer cannot be held liable for damages resulting
from:
• Breakage and transport damages
• Failure to observe operating instructions
• Improper use
• Unauthorized modifications to the machine
• Use of untrained personnel
• Use of unapproved replacement parts
1.5.1 Transport
Dürkopp Adler cannot be held liable for breakage and transport
damages. Inspect the delivery immediately upon receiving it.
Report any damage to the last transport manager. This applies
even if the packaging is undamaged.
Leave machines, equipment and packaging material in the con-
dition in which they were found when the damage was discovered.
This will ensure any claims against the transport company.
Report all other complains to Dürkopp Adler immediately after
receiving the product.
1.5.2 Proper use
The Dürkopp Adler 650-16 is intended for sewing light to moder-
ately heavy material. Light to moderately heavy material requires
a needle strength of 70-120 Nm.
The machine is intended only for use with dry material. The
material must not contain any hard objects.
The stitching is produced using core spun threads, polyester
fibers, or cotton threads.
The sewing machine is intended for industrial use.