Instruction manual

Sewing continuous seam

without attaching stitches - Prerequisite: on the operating panel

the key has its LED OFF

- Prerequisite: on the operating panel

th e k e y (one stitch basting)

has its LED OFF

- Push pedal forwards and keep it pushed.

- The machine sews at the speed of

rotation set by the pedal.

- Feed the material manually

Even during the continuous seam, it is

possible to sew a single stitch by pushing

briefly the pedal!

In mid-seam

(only valid w ith sew ing

continuous seam)

Interrupt the sewing process - Release pedal (rest position).

The machine stops in the needle up position

- Each time that the pedal is pushed briefly

the machine execute exactly one stitch.

If you actuate the pedal longer

the machine will sew continuously.

Resume the sewing process - Push the pedal forwards. The sewing

machine sews at the speed of rotation

set by the pedal.

At the seam end

with thread trimming - Push pedal backwards and keep it pushed.

- The thread will be cut

- Sewing foot in highest position

(reverse function)

The material can be removed.

without thread trimming - Push pedal backwards and keep it pushed.

- Sewing foot in highest position

(reverse function)

- The material can be removed.

The threads must be cut manually