Instruction manual

6.8 Adjusting the sewing foot stroke
Caution: Danger of injury!
Turn off the main switch !
The sewing foot stroke may only be adjusted with the machine
switched off.
The height of the sewing-foot stroke is determined by the position of
connecting rod 1.
Adjusting the sew ing foot stroke
–
Loosen the nut 3 on the back of the machine arm.
–
Shift the connecting rod 1 within the shifting lever 2.
Connecting rod completely at the top = maximum s ewing foot
stroke (20 mm)
Connecting rod completely at the bottom = minimum sewing foot
stroke (10 mm)
–
Tighten the nut 3.
14
321