Instruction manual

Content Page:

Part 2: Installation Instructions Class 609

1. Scope of delivery .............................................. 3

2. General and transport packing ..................................... 3

3. Assembling the stand

3.1 Assembling the stand components (MG55-3 stand) .......................... 4

3.2 Assembling the table plate and mounting the control unit ...................... 5

3.3 Settingtheworkingheight ......................................... 7

4. Mounting the machine head

4.1 Fitting the machine head on the table plate ............................... 8

4.2 Earthing .................................................... 9

5. Mounting the table and pedal extension (optional equipment)

5.1 Mounting the table extension........................................ 10

5.2 Mounting the pedal extension ....................................... 11

6. Sew ing drive

6.1 Connecting the HoHsing HVP 70-4-ED-2-CE sewing drive ..................... 12

6.1.1 Connecting the control unit ........................................ 12

6.1.2 Mounting and connecting the external operating panel C300 .................... 13

6.1.3 Mounting and connecting the proximity switch ............................. 13

6.1.4 Connecting the control connection of the thread trimmer and thread tension release ...... 14

7. Checking the mains voltage and connecting the machine .................... 15

8. Setting the sew ing drive

8.1 SettingtheHoHsingHVP70-4-ED-2-CEsewingdrive......................... 15

8.1.1 Settingparametersofthecontrolunit .................................. 15

8.1.2 Settingtheproximityswitchandcheckingitspositioning....................... 15

9. Lubrication .................................................. 17

10. Sew ing test .................................................. 18