Instruction manual

6.1.2 Mounting and connecting the external operating panel C300

–

Screw the external operating panel 2 on the mounting bracket 1.

–

Screw the mounting bracket 1 laterally on the machine head.

–

Bring the connection cable downwards through the cutout in the

table plate .

–

Connect the connection cable with the extension cable and plug it

into the corresponding socket of the control unit.

6.1.3 Mounting and connecting the proximity switch

–

Push the proximity switch 3 onto the flange of the hand wheel.

–

The groove in the proximity switch housing must engage over the

twist protection of the belt guard.

–

Tighten both stud bolts on the proximity switch ring.

–

Bring the connection cable downwards through the c utout of the

table plate.

–

Plug the connection cable into the corresponding socket of the

control unit .

21 1