Operating instructions

ManualsBrandsDuerkopp Adler ManualsBusiness equipment589

9.5 Sewing

The sewing process can be controlled with the pedal, the hand

switches or the “RST” and “ESC” keys on the operating panel.

In automatic operation the machine moves to the new insertion position

after each sewing process (sequence mode).

In manual operation it moves to the insertion position of the current

buttonhole (sequence and single-button mode).

Sewing with the pedal

–

Push the pedal back.

The machine moves to the insertion position.

–

Insert the material.

–

Push the pedal forwards to position 1.

The clamps close.

Releasing the pedal opens them again.

The pedal moves to its rest position.

–

Push the pedal down to position 2

The sewing process is initiated.

–

To carry out another sewing process the pedal must be returned to

its starting (rest) position.

Sewing with the operating-panel keys

–

For the first operation after switch-on press the “RST” key if any

parameters have been changed or another buttonhole shape has

been selected manually.

The machine moves to its starting position and from there to the

insertion position.

–

If you wish the machine to move to its starting position, press the

“ESC”key.

–

Insert the material.

–

Press the “RST” key once.

The clamps close.

–

If you wish the clamps to re-open, Press the “ESC”key.

–

If you wish the sewing process to be initiated, press the “RST”key

again.

After the sewing process the machine returns to the insertion

position.

9.5.1 Fast switch-off

The comprehensive safety system on the 589 contains various features

enabling it to be halted immediately in the event of incorrect operation,

needle breakage, thread breakage etc.

–

Push the pedal backwards beyond the rest position, press the

“RST” key or press button 1 or 2 on the hand switches.

The machine halts with the needle raised.

–

If you wish sewing to be resumed, push the pedal forwards, press

the “RST” key again or press button 2 on the hand switches.

The sewing process resumes.

–

If you wish to remove the material, push the pedal back, press the

“ESC” key on the operating panel or press button 1 on the hand

switches.