Operating instructions

3.3 Aligning and connecting the pedal

–

Align the pedal 4 laterally on the stand brace 5 so that the middle of

the pedal is roughly beneath the needle.

–

Screw the pedal 4 firmly to the stand brace.

–

Screw the set value initiator 1 firmly to the stand brace.

–

Attach the pedal linkage 3 to the set value initiator 1.

–

Slightly undo clamping screw 2.

–

Adjust the pedal linkage so that when released the pedal 4 is at an

angle of about 10°.

–

Tighten clamping screw 2.