Operating instructions

4. Electrical connection

CAUTION:

The mains voltage must coincide with the rated voltage specified on

the name plate.

The machine adapts the local mains voltage via connection terminals 1

to 5 and A to D of the transformers in the control box.

Both the transformer terminals are factory-set to a mains voltage of

230 V.

For different mains voltages the terminals must be connected as

follows:

Strip terminal 2:

Voltage blue brown-and-white

200V A B

230V A C

240V A D

On strip terminal 5 the brown-and-white and blue-and-white wire

jumpers must be changed. Both connection terminals are given in the

table.

Example:

“L-4" means place the wire jumper between terminals L and 4.

Strip terminal 5:

Voltage brown-and-white blue-and-white

190V L - 4 N - 3

200V L - 4 N - 2

210V L - 4 N - 1

220V L - 5 N - 3

230V L - 5 N - 2

240V L - 5 N - 1

–

Undo screws 3.

–

Carefully remove the cover 4.

–

Check the configuration of the connections to the transformer

plug strips.

–

If necessary change the connections in line with the mains

voltage.

–

Re-attach the cover 4 with screws 3.