Operating instructions

5. Changing the cutting blocks

The cut length can be changed by switching cutting blocks.

Caution: danger of injury

Cutting blocks may only be switched with the machine switched off or

in the firm hold position.

Removing the cutting-block holder

–

Remove clamp plates (see section 3.2).

–

Press button 1.

–

Pull the cutting-block holder 2 downwards and remove.

Fitting the cutting-block holder

–

Press button 1.

–

Insert the cutting-block holder in the cutting-block mounting.

–

Release button 1.

–

Check that the cutting-block holder is firmly seated in its mounting.

–

Fit clamp plates (see section 3.2).