Operating instructions

33.18 Input Test

One can test individual inputs in this menu.

–

When you are in the service menu, sequentially select the following

menu items with the arrow keys and the “OK” key:

- Test Functions

- Multitest

- Input Test

The “ Input Test ” menu appears.

–

Select the desired input with the up and down arrow keys. The

current status of the input is shown behind the input number:

- = Input not activated

+ = Input activated

–

Manually move that part of the automatic sewing machine which

triggers the appropriate input.

–

The status of the input changes as soon as the input is operated.

Input Designation

S01 Looper thread monitor

S02 Needle thread monitor

S08 Depending on subclass left or right needle penetration

S09 Pressure monitor

S10 Hand switch key “1"

S11 Hand switch key “2"

S13-S16 Pedal

S18 Switch “Safe Stop”

S24 Buttonhole cut

S25 Reference switch sewing mechanism rotation

S26 Reference switch lengthwise movement

S27 Reference switch-crosswise movement