Operating instructions

33.10 Setting the Thread Monitor

The thread monitors for the looper thread and the needle thread can be

set in this menu. The values behind the needle thread and looper

thread mean the following:

0 = The respective thread monitor is turned off

>0 = The number of stitches after which the sewing cycle

is stopped because of thread breakage

–

When you are in the service menu, sequentially select the following

menu items with the arrow keys and the “OK” key:

- Configuration

- Machine

- Thread Monitor

The “ Thread monitor ” menu appears.

–

Select the thread monitor which is to be set with the arrow keys.

–

Press the “OK” key.

–

Set the desired value with the arrow keys.

–

Press the “OK” key.

The value for the thread monitor are now saved.