Operating instructions

24. Gimp-pull Mechanism for Subclass -141000

Caution Risk of Injury!

Set the gimp-pull mechanism only in the “Safe Stop” position or with

the machine turned off.

Rule and Control

The drop weight 3 with the adjustable brake flap 2 pulls the gimp back

to the correct starting length.

The path of the drop weight must be limited by the stop screw 1 so

that, at the start of sewing, the gimp is as short as possible, but is still

securely sewn on.

This is just about the case when the gimp end protrudes approx. 4 mm

out of the gimp hole of the needle plate.

Correction

–

Screw in screw 1 = Shorter gimp end.

–

Screw out screw 1 = Longer gimp end.