Operating instructions

Correction

–

Turn the machine on, the machine runs into the sewing position.

–

Turn the Safe Stop on.

–

Loosen the screws on the switching segment 3.

–

Turn switching segment 3 in the direction of rotation so that the

switch 2 receives contact.

–

Turn switching segment 3 back so far that the switch 2 is

deactivated again.

–

Tighten the screws on the switching segment 3.

Correction of the clearance of the proximity switch to the disc

–

Loosen nut 1.

–

Screw proximity switch 2 out or in.

–

Tighten nut 1.