Operating instructions

4.4 Changing the needle
CAUTION: DANGER OF ACCIDENTS !
Turn off main switch!
Switch off the machine before changing the needle!
Knife side
–
Loosen the screw
1
.
–
Remove the neelde from its bar.
–
Introduce the new needle as deep as possible into its bar a.
–
Adjust the needle so that its furrow is located on the other side of
the knife.
–
Tighten the screw
1
.
NOTE !
The factory-set distance between the hook and the needle applies to
the needles having a thickness of
80
.
When inserting a needle having a different thickness it may be
necessary to correct the distance ( see the Service Instructions ).
1
10