Operating instructions

–
Press the key
Taste B
.
The display will show
"Pos 0
together with a circular symbol.
–
Turn the handwheel in the direction of rotation ( see the arrow on
the belt guad ) until the displayed symbol disappears and he
position
Position 0
( reference position ) is reached.
–
Press the key
"E"
.
The reference positin will be accepted and the display will show
the parameter
- 171"
.
–
Repeat the setting process ( Parameter
"F - 170"
), if
the reference position has not been memorisd and the display
shows the error message
"in A3"
.
Quit the correction mode
–
Press the key
"P" two times
.
The sewing basket will be lifted.
Memorise the setting
–
Lower the pedal forwards and release a complete sewing cycle.
The control will memorise he new setting.
Control the setting
–
When turning back via the
Position 0
(reference position ), it is
necessary to lower the sewing basket ( see the Service
Instructions ).
NOTE !
The setting will be lost if no complete sewing cycle has been
performed before switching off the main switch!
15