Instruction manual

4.10 Determining the end label barcode
In order to carry out changes in the barcode labelling system the
operator must be authorized to security level 2.
–
Log in to the system.
–
Call up “Check”.
–
Call up “Setup”.
–
Call up “Label”.
In field 1 the layout of the endlabel barcode is displayed.
The meaning of the predefined codes is now explained:
D2 Current day (two digits); for example: June 9 = 09
M2 Current month (two digits)); for example June 9 = 06
Y2 Current year (two digits); for example: 1999 = 99
Y4 Current year (four digits); for example: 1999 = 1999
J3 Number of days in the year (three digits);
for example: February 20 = 051
H2 Current hour (two digits);for example: 8:52:13 = 08
U2 Current minute (two digits);for example: 8:52:13 = 52
S2 Current second (two digits);for example: 8:52:13 = 13
P1 Current personnel number (one digit);for example:
1234 = 1
P2 Current personnel number (two digits);for example:
1234 = 12
P3 Current personnel number (three digits);for example:
1234 = 123
P4 Current personnel number (four digits);for example:
1234 = 1234
E1 Current machine number (one digit);for example: 567 = 5
E2 Current machine number (two digits);for example:
567 = 56
E3 Current machine number (three digits);for example:
567 = 567
F1 Manufacturer code (one digit);for example: 1357 = 1
F2 Manufacturer code (two digits);for example: 1357 = 13
F3 Manufacturer code (three digits);for example: 1357 = 135
F4 Manufacturer code (four digits);for example: 1357 = 1357
92
1