Instruction manual

–

Select the individual seam sections by clicking on them and enter

the corresponding seam parameters.

The selected seam segment is displayed with a raised bar.

monitored (red) not monitored

(green)

selected

seam section

Parameter Description

Free/SAB Indicates whether a free seam segment

or a tearing seam is activated

Max. speed maximum speed for the current seam segment

Stitch length stitch length for the current seam segment

St l corr.fac. Correction of the stitch length depending

on the material

Dist. Length Distance between the two strips on the

sewing material

Thread tension Tolerance range (lower value, top value)

and number of tolerance stitches

Thread tens. Value of power supply in % (only with ETT)

Stop at strip, stitch counting or manually (Pedal – 2)

GB thread ten.

Komp file Selection of a Teach-in file (only with ETT)

Lift Stroke Lift stroke of the alternating sewing feet

Lift stroke knee Lift stroke upon activating the knee lever

(Rapid stroke adjustment)

Bartack stitches Number of bartack stitches

(forwards/backwards)

Sewing in the label Activates the seam scanner

TT ON/OFF Trims the thread at the end of the seam

section

–

After setting the seam parameters for all of the seam sections,

press the button “Save”.