Instruction manual

2.8.2 Stroke motion of the feeding foot

Caution: Risk of injury!

Tur n off the main switch.

Check and set the stroke motion only when the machine is switched

off.

Prerequisite

The strokes of the feeding foot and the presser foot are identical

(see chapter 2.8.1).

Correct timing of the feeding dog’s lifting motion

(see chapter 2.3.3)

Standard

The descending feeding foot 2 is, with max. sewing foot stroke and

max. stitch length, supposed to touch down on the feed dog, when

the needle 1 is descending and the needle tip has reached the upper

edge of the feeding foot (95° on the handwheel).

–

Set the maximum stitch length.

–

Set the maximum sewing foot stroke.

–

Tur n the handwheel and check the stroke motion.

Correction

–

Loosen the screws on the lifting cam 3 (2 pieces).

–

Twist the cam accordingly.

ATTENTION!

The cam must not be shifted axially.

–

Tighten the screws on the lifting cam 3.

–

Check the setting.