Instruction manual

Via the ID number the corresponding parameters will be requested
from the data base (here the seam patter n with the number 330).
Note
Three-digit seam patter ns are identified with seam pattern numbers
between 100 – 999 (identifying numbers between 001 and 099 are not
admissed.
–
The “Prim. barcode mask L/R” determines whether it is a right or
left-hand seat.
For example:
·
Primary barcode:
(read via hand scanner)
11112233001234567890
·
Primary barcode identification in the field “Prim. barcode mask
L/R”:
00000000110000000000
·
ID number:
00
–
The corresponding ID number must be defined in the fields “ID
left” and “ID right”.
–
Example with two pieces:
11112233001234567890 11112333001234567890
“Prim. barcode ident. A”:
11110000000000000000 11110000000000000000
ID number:
1111 1111
The ID numbers are identical = OK.
11112233001234567890 11112333001234567890
“Prim. barcode ident. B”:
00001100000000000000 00001100000000000000
ID number:
22 23
The ID numbers are different = OK.
The piece with the ID number 22 is the top layer, the ID number 23 is
the bottom layer.
11112233001234567890 11112333001234567890
“Prim. barcode ident. C”:
00000011100000000000 00000011100000000000
ID number:
98