Instruction manual

2 Sewing machine

2.1 Position of the arm shaft crank on the arm shaft

Caution: Risk of injury!

Tur n off the main switch.

Check and set the position of the arm shaft crank only when the

machine is switched off.

Standard checking

The arm shaft crank 1 is fastened on the arm shaft 4 with three

threaded pins 2. The threaded pins must sit on the flat spot 3.

Correction

–

Loosen the threaded pins 2 on the arm shaft crank.

–

Twist the arm shaft crank 1 on the shaft until the threaded pins 2

sit on the flat spot 3.

–

Push the arm shaft crank axially to the right as far as it will go.

–

Tighten the threaded pins 2.