Operating instructions

Table Of Contents

2.3 Transport within customer premises

For internal transport the sewing machine and the control unit (PC)

must be lifted and moved by a suitable vehicle (e.g. a fork-lift).

All connections between the sewing machine and the control unit

should be undone if appropriate.

2.4 V-belt tension

After the machine has been moved the pre-set V-belt tension must be

checked.

The tension in the V-belt 1 must be such that it can be depressed by

approx. 10 mm by applying finger pressure in the middle.

–

Loosen nuts 2 and 3

–

Swivel drive until V-belt tension is correct.

–

Retighten nuts 2 and 3.