Operating instructions

Table Of Contents

2. General and transport packing

CAUTION:

The sewing unit may only be set up by trained specialist personnel.

2.1 Transport packing

The transport packing must be removed before setting-up.

–

Remove the safety straps and battens from the upper part of the

machine, table and frame.

–

Remove the safety block and straps from the motor.

2.2 Connecting the control unit (PC)

–

Connect plug connector 1.

–

Screw on supply lead 2.

2.2.1 Check date and time

Attention:

After s witching on the machine, check the system date 3 without fail!

–

Check the date and correct it if necessary.

–

Check the time (AM or PM) and correct it if necessary.