Operating instructions

6.9 Adjusting barcode definitions

The operator must have security level 2 in order to carry out changes

in the barcode labelling system.

–

Log on to the s ystem.

–

Activate “Check” func tion

–

Activate “Setup” function

–

Activate the “Extended” function.

–

Select the required type in the “Primary barcode type” field.

This barcode is read into the system by the manual scanner.

–

Select the required type in the “Thread-barcode type” field.

The selection applies to both the upper and hook threads.

–

Select the required type in the “End-label barcode type” field.

–

Masks can be set in the “Primary-barcode identifier A” (material

and colour barcode), “Primary-barcode identifier B” (upper and

lower piece barcode), “Primary-barcode identifier C” (stitch type

barcode) and ”Primary-barcode mask L/R" (left and right-piece

barcode) fields to pass on system-relevant information (entry: “1")

or ignore unimportant information (entry: ”0").