Operating instructions

6.8 Setting the end-label layout

The operator must have security level 2 in order to carry out changes

in the barcode labelling system.

–

Log on to the s ystem.

–

Activate “Check” func tion

–

Activate “Setup” function

–

Activate “Label” function

–

Enter the required height of the label in the “ Label length” field.

e.g.: 25 mm

–

Enter the gap between labels in the “Gap” field.

e.g.: 3 mm

–

Enter the required label texts in fields 1,

e.g.:

end-label text 1 = manufacturer

end-label text 2 = model

end-label text left = left-hand seat

end-label text right = right-hand seat

–

Set the origin for the text coordinates in fields 2.

–

Set the position of end-label text 1 in the “Pos. text 1 X” and “Pos.

text 1 Y” fields.

–

Set the position of end-label text 2 in the “Pos. text 2 X” and “Pos.

text 2 Y” fields.

–

Set the position of the barcode in the “Pos. BC X” and “Pos. BC Y”

fields.

–

The required font can be set in field 3.

–

To print the label, press button 4 prints out the label.