Operating instructions

Contents Page:
Preface and general safety instructions
Part 1: Operating Instructions, Class 550-767
(Edition: 10.2007)
1. Items delivered .............................................. 5
2- Designated use .............................................. 5
3. Equipment
3.1 Basic equipment .............................................. 6
3.2 Additional equipment ........................................... 6
4. Technical data ............................................... 7
5. Operation
5.1 Threading the needle thread ....................................... 8
5.2 Adjusting the needle thread tension .................................. 10
5.3 Opening the needle-thread tension ................................... 11
5.4 Winding on the hook thread ....................................... 12
5.5 Threading the bobbin thread ....................................... 13
5.6 Adjusting the bobbin thread tension .................................. 13
5.7 Replacing the needle ........................................... 14
5.8 Liftingandlockingthesewingfeet ................................... 15
5.9 Adjustingthesewing-footstroke..................................... 16
5.10 Sewing-footpressure........................................... 16
5.11 Adjusting the stitch length ........................................ 17
5.12 Buttonsonsewingarm .......................................... 17
5.13 RFW 13–3 bobbin thread monitor .................................... 18
5.14 HP 13–10 electro-pneumatic rapid stroke adjustment ........................ 20
6. Operating the rupture-seam visualisation facility
6.1 Accesstothesystem ........................................... 21
6.1.1 Advice for the production begin ..................................... 24
6.2 Seam-typefunction ............................................ 25
6.2.1 Createanewseamtype ......................................... 25
6.2.2 Editseamtype ............................................... 30
6.2.3 Copyseamtype .............................................. 31
6.2.4 Deleteseamtype.............................................. 32
6.3 Database function ............................................. 33
6.4 Checkfunction............................................... 35
6.5 Needle-thread tension tolerance range ................................. 48
6.6 Error codes ................................................. 50
6.7 Setting the end-label barcodes ..................................... 51
6.8 Setting the end-label layouts ....................................... 54
6.9 Adjustingbarcodedefinitions ...................................... 55
7. Sew ing
7.1 Label scanner (optional) ......................................... 62
8. Maintenance
8.1 Cleaning ................................................... 63
8.2 Oiling..................................................... 64
1