Operating instructions

HINT!

The sewing-foot pressure can only be altered when knob 3

(clamping block) is released: see the Servicing instructions.

5.11 Adjusting the stitch length

The stitch length is adjusted in the ”Seam types” menu on the Touch

Screen Monitor.

5.12 Buttons on sewing arm

Button 5 = intermediate lock-stitches during sewing

Button 6 = needle in high or low position

Button 7 = suppresses starting or finishing lock-stitches

Button 8 = authorises thread-cutting in the monitored region

–

Press and hold down button 5.

An intermediate lock-stitch is sewn. The machine sews backwards

for as long as the button is held down.

–

Press button 6.

The needle is raised or lowered.

–

Press button 7.

The next starting or finishing lock-stitch will not be sewn.

–

Press button 8.

The thread can now be severed in the monitored region using the

pedal. This enables the material to be removed in the event of a

fault. The program issues an error message.

56 7 8