Operating instructions

5.5 Threading the bobbin thread

CAUTION: danger of injury!

Turn off the main switch!

The bobbin thread may only be threaded when the sewing machine is

switched off.

–

Raise flap 1 and remove the e mpty bobbin using a magnet.

–

Insert bobbin 2 so that it turns anti-clockwise when the thread is

drawn off.

–

Pass the thread through slit 4 and pull beneath spring 5.

–

Pass the thread through slit 6 and pull out approx. 3 cm of thread.

–

Close flap 1 and pull the thread through the guide 6 of flap 1.

–

Enter the bobbin number engraved on the bobbin 7.

CAUTION!

Before you press the ENTER key, please ensure that the number

entered does in fact correspond to the number engraved on the

bobbin.

5.6 Adjusting the bobbin thread tension

The bobbin thread tension must be adjusted in accordance with the

required seam type.

–

Adjust the tension with screw 3.

6543