Operating instructions

5. Operation

5.1 Threading the needle thread

CAUTION: DANGER OF INJURY!

Turn off the main switch!

The needle thread may only be threaded with the machine turned off.

Versions with switch 2:

Before placing the needle-thread cones on the s tand they must be

scanned by the manual scanner. If a needle-thread bobbin is removed,

this is recognised by the control via switch 2 and the scanning process

is to be repeated.

Version w ith optional thread-barcode scanner:

–

Place the thread bobbin on the stand while ensuring that the

barcode of the thread bobbin can be read by the optional

thread-barcode scanner.

If the barcode is not recognised by the scanner, an error message

will be displayed on the monitor.

–

Open and fold back cover 1.