Operating instructions

5.6.3.8 Mirror - End - Continue
The symbols for MIRROR, END and CONTINUE appear in the display
field for the soft key functions.
Display of the soft key functions when the opportunity for MIRRORING
exists:
SOFTKEY F2 SOFTKEY F4 SOFTKEY F5
Display of the soft key functions when the opportunity for MIRRORING
does not
exist:
SOFTKEY F4 SOFTKEY F5
MIRROR :
The program for the right / left piece is generated as a mirror image
and saved. New soft key functions are displayed.
END :
Only the just generated piece is saved. Mirroring is no longer possible.
New soft key functions are displayed
CONTINUE :
The selection functions are exited again. The entry of more program
steps is possible.
The current piece is mirrored via the F2 soft key.
Entry : Mirror
The current piece is mirrored. The programming mode
is exited and one retur ns to automatic sewing.
The follow-up functions COPY - AUTOMATIC are
displayed.
The program end is marked via the F4 soft key.
Entry : Program end
The program end is marked.
The follow-up functions COPY - AUTOMATIC are
displayed.
95
4