Operating instructions

5.6.3.7 Setting the Piece or Program End
After the last program step, t he piece or program end is activated by
pressing the ‘F4’ soft key and there is an advance to the follow-up
functions MIRROR - END - CONTINUE (Chapter 5.6.3.8).
Display of the soft key functions by generation of a new (empty)
sewing program:
SOFTKEY F1 SOFTKEY F4
Display of the soft key functions in case of changes to an existing
sewing program:
SOFTKEY F1 SOFTKEY F3 SOFTKEY F4
The “TEACH-IN” function screen can be exited at any time via the F1
soft key.
Entry : Close window
Close the “TEACH-IN” function screen.
ATTENTION !!!
All changes made up t o this point in the current sewing program are
voided by the exiting of the window with the ‘F1’ soft key.
Only parameter changes in the current sewing program are saved via
the F3 soft key, the programming mode is exited and one returns to
the “AUTOMATIC” main screen.
Entry : Retur n to automatic sewing
The currently altered sewing program is
saved. The programming mode is exited
and one returns to automatic sewing
The piece or program end is marked via the F4 soft key.
Entry : Piece or program end
The piece or program end is marked.
The follow-up functions MIRROR - END - CONTINUE
are displayed
94