Operating instructions

5.6.3 “TEACH-IN” Entry Mode
The selection of the base parameters,
Sewing graphic
Application area
Size
Starting piece and
Program number,
is no longer possible at this point, the previously made settings are
now established for this sewing program and enclosed with a border.
In the Teach-In operation the screen display contains further
parameters which are important for the generation of a complete
sewing program (Illus. 5.6.3.1).
Illus. 5.6.3-1: Function screen for the “TEACH-IN” entry mode
The “TEACH-IN” selection screen is exited again v ia the F1 soft key.
Entry : Close window
Close the “TEACH-IN” selection screen.
ATTENTION !!!
All changes made up t o this point in the current sewing program are
voided by the exiting of the window with the ‘F1’ soft key.
89
4