Operating instructions

5.6.2.2 Change of the DOB/HAKA Application Area
The changeover between the DOB or HAKA application areas occurs
with the 2 key of the numeric keypad. The selected area is accordingly
marked in the symbol.
Application area:
Direct selection of the change of application area function.
HAKA application area
DOB application area
The base size is adapted appropriate to the setting of the application
area.
5.6.2.3 Changing the Sewing Graphic
The selection of the sewing graphic is immediately active after the
pressing of the ‘3’ key of the numeric keypad and is highlighted with a
black shadow bar. The desired graphic can be entered as one to two
digits via the numeric keypad. The value is accepted through the
pressing of the OK key.
Sewing graphic
Direct selection of the sewing graphic parameter
Entry : Currently only 01 = Ellipse
To Numeric entry
Confirmation of the numeric entry
Retain old numeric value unchanged
86