Operating instructions

1. General

1.1 Hardware Components

The configured 550-16-26 work place is executed w ith the following

components:

DAC II B controls with the SAB C167-CR

With integrated feed motor controls for a max. of 4 step motors

With CAN interface

With RS232 and RS422 interfaces

2 step motor output s tages

2 step motors for the upper and lower belt drive

AB285 sewing drive controls from Efka

DC1500 sewing drive from Efka

Sewing drive pedal for direct speed setting

Additional pedal for direct bunching value alteration, as desired

continuous over the whole value range (0-15) or as a correction

value +/- 0.5 .

Knee switch for the sequence advance

1.2 Operation

BF1CE control panel and key panel

With 15 keys for the adjustment of the bunching value (½ values

possible through the simultaneous pressing of 2 neighbouring

keys)

With assignment of keys for machine functions

Additional pedal for a continuous adjustment of the bunching

value

Programs can be generated with the “Teach-In” procedure

Mirroring and gradation in all sizes

Graphical display of the sewing parameters

Precise program transfer from one work place to another via RAM

card or USB flash drive.