Operating instructions

5.1.1 Selection of the Program Sequence and Program Number
- Program sequence 01 -
The program sequence 01 contains all 15 programs, but only shows a
single program. The program number can be continuously changed in
the range from 01 to 15.
01: < 10 >
The selection of the desired program number occurs through the
following keys:
/ CursorLeft/CursorRight
...-15-01-02-03-04-...-12-13-14-15-01-...
The next program number in the program cycle can be selected with
the Cursor Right and Cursor Left keys. In order to quickly change the
program cycle, the next or previous program sequence can be
selected with the Cursor Up and Cursor Down keys.
Example:
- Program sequence 06 -
The selection of the desired program sequence occurs through the
following keys:
/ Cursor Up / Cursor Down
...-07-01-02-03-04-05-06-07-01-...
The selection of the desired program number occurs through the
following keys:
/ CursorLeft/CursorRight
...-09-01-03-07-09-01-...
49
4