Operating instructions

4.3.7 Sewing Drive Function Check

The sewing drive can be checked with this test. After being called-up,

the sewing drive is first initialized and run into the initial position

(needle up). Then the current software s tatus and the software date

code of the sewing drive controls are shown in the screen.

The function check can begin.

Illus. 4.3.7-1 Function screen - Sewing drive test

The selection of the needle positioning and sewing drive speed

functions occurs via the following keys:

/ CursorLeft/CursorRight

Confirmation or Return

Software status display:

e.g. Version: 5500 D Date code: 99120312