Operating instructions

4.3.6 Step Motor Function Check
The step motors used can be checked with this test. The symbol for
the step motor is shown repeatedly in the screen with the
corresponding axis designations (W,X,Y,Z). Only the axes used in this
machine class can be selected.
(With Cl. 550-16-26 only the X and the Y axes are operational)
Illus. 4.3.6-1 Function screen - Step motor test
The selection of the desired step motor axis occurs via the following
keys:
/ CursorLeft/CursorRight
Confirmation or Return
The “Step Motor Test” function screen is exited again via the soft key
“F1”.
Entry : Close window
Close the “Step Motor Test” function screen
38