Operating instructions

4.3.3 Manual Check of the Inputs

The individual inputs, after being selected, are checked as to function

in this test program. When changed, the corresponding switching

status is shown (ON = “+” and OFF = “(”).

The selection of the desired input number occurs via the keys of the

numeric keypad.

Example:

–

Enter input number 07 (Knee switch)

–

Press the “OK ” key

–

Operate knee switch (input no. 7) ðStatus “+”

–

Release knee switch (input no. 7) ðStatus “-”

Illus. 4.3.3-1 Indicator screen - Input sel ect

Input assignment by Cl. 550-16-26:

Input Designation

7Kneeswitch

The “Input Test” function screen is exited again v ia the soft key “F1”.

Entry : Close window

Close the “Input Test” function screen