Operating instructions

4.2.4 Check Program for the Key Panel
The keys of the key panel can be checked as to function and the
intensity of the segment display (default value = 08) can be changed
with the “Cursor Up” and “Cursor Down” keys in the check program.
When a key is pressed (e.g. key “12"), the corresponding key is
marked with an ӟ" in the screen (Key 12:) and the key designation is
shown in the segment display.
Illus. 4.2.4-1 Indicator screen for the key panel test
Function test of the keys:
to Pressed key is checked and displayed. e.g. key “12"
Pressed key “OH” is checked and displayed.
Setting the intensity:
/ Changing the intensity. Display becomes brighter or
darker. (Default value = 08)
The “Key Panel Test” function screen is exited again via the ‘F1’ soft
key.
Entry : Close window
Close the “Key Panel Test” function screen
4
29