Operating instructions

4.2 Machine-specific Check Programs - Soft key F2

If, when the machine is tur ned on, the F2 soft key is held pressed, the

machine-specific check programs are activated. These check

programs are necessary for the setting and inspection of individual

machine components.

Illus. 4.2-1 Start screen - Machine-specifi c check programs

Base initialization of the machine. Only accessible via entry of

a special code number.

Setting program for the additional pedal-bunching value change

Check program for the analog/digital converter

Check program for the key panel

Currently without function

The selection of the desired function occurs via the following keys:

/ Cursor Up / Cursor Down

/ CursorLeft/CursorRight

Confirmation or Return

NOTE:

The exiting of this function screen occurs only by tur ning the machine

off.

Changes in the parameters or the reset to factory settings remain

saved in memory after the machine is turned off.