Operating instructions

4. Calling Up the Test and Check Programs

After the machine is turned on the controls are initialized and the

machine program is automatically called up. If, during the display of

the DA logo, one of the 5 soft keys is pressed, then further programs

can be activated.

Main switch

Currently not in use

Code entry

Machine Machine- Multitest Terminal test Contrast

settings specific adjustment adjustment

check programs

Optional

equipment

Machine

program

With the F1 soft key, a program section w ith which the machine

configuration can be altered is called up. As a rule, changes in t he

machine configuration lead to mechanical conversions. For safety

reasons, this program section is thus only accessible via the entry of a

special code number.

Via the F2 soft key, the machine-specific check programs are

activated. These check programs are necessary for the setting and

inspection of individual machine components.

The Multitest system, which is integrated in all controls, is called up

via the F3 soft key.

A self-test of the terminal can be selected via the F4 soft key.

The selection of the contrast setting of the screen is conducted via the

F5 soft key.