Operating instructions

3.2.3 Supplementary Thread Tension
Supplementary thread tension on/off
(The active function is indicated by the green LED)
This function can be programmed in “Teach in” modus of the
automatic operation.
3.2.4 Bartack Suppression / Bartack Activation
Bartack suppression / bartack activation
(Current bartack function is inverted)
The next bartack cycle can be individually suppressed or activated.
a) Before the seam start, this function only influences the beginning
bartack:
- Beginning bartack on + ð No beginning bartack
- Beginning bartack off + ð Beginning bartack
b) In the seam, t his function only influences the end bartack:
- End bartack on + ð No end bartack
- End bartack off + ð End bartack
It is always conducted in the set bartack type (single / double).
3.2.5 Needle Up / Down
+ Needle position up / down
Through operation of the keys, the needle conducts a position change
from position 1 (needle down) to position 2 (needle up) or from
position 2 (needle up) t o position 1 (needle down).
This function is only available when the sewing drive is idle.
This function can not be programmed in automatic operation.
3.2.6 P key (Currently no function)
(currently no function)
3.2.7 E key (Currently no function)
(currently no function)
4
17