Operating instructions

5.7.2 Changing a Program Sequence
The programming or changing of a program sequence is conducted as
follows. Select the program sequence to be changed with the
procedure already described (see Chapter 5.7.1). Enter a two-digit
program no. via the numeric keypad. (Attention: The old program
sequence is completely overwritten with a single entry). After the entry
of a 6th program no. or by pressing the OK key, the entry is ended and
the newly generated program sequence is saved.
The selection of the desired program series occurs with the keys:
/ Cursor Up / Cursor Down
The entry of the desired program no. occurs with the keys:
to Numeric entry
Confirmation or Return
100