Operating instructions

5.6.3.9 Copy - Automatic
The symbols for COPY and AUTOMATIC appear in the display field for
the soft key functions.
Display of the soft key functions when the opportunity for COPY
exists:
SOFTKEY F2 SOFTKEY F3
Display of the soft key functions when the opportunity for COPY does
not exist:
SOFTKEY F3
COPY :
The generated program is copied to every size of the application area
(DOB/HAKA) taking into account the gradation values entered. The
“TEACH_IN” function screen is exited. The machine is ready for
sewing and the “AUTOMATIC” main screen with the assigned steps in
the sewing graphic is shown.
AUTOMATIC :
The generated program is only saved in the base size. The
“TEACH_IN” function screen is exited. The machine is ready for
sewing and the “AUTOMATIC” main screen with the assigned steps in
the sewing graphic is shown.
The generated program is copied to every size of the application area
(DOB/HAKA) via the F2 soft key.
Entry : Copy
The generated program is copied to every size of the
application area (DOB/HAKA) taking into account the
gradation values entered. The programming mode is
exited and one returns to automatic sewing.
Only parameter changes in the current sewing program are saved via
the F3 soft key, the programming mode is exited and one returns to
the “AUTOMATIC” main screen.
Entry : Retur n to automatic sewing
The generated program is only saved in the base size.
The programming mode is exited and one retur ns to
automatic sewing
97
4