Operating instructions

–

Remove the dongle 2.

–

If necessary confirm the software version by pressing the “OK”key.

CAUTION !

The machine software must match the machine class.

If the software version differs from the machine class, do not

confirm the loading.

Switch the machine off and repeat the loading proccess using

the correct software version.

The adjustment of the control is described in the operating instructions

chapter 8 “Operating the control 530".

Before switching on the button sewing automat for the first time, the

number of the installed clamping foot must be entered first.

–

Plug in mains plug.

–

Switch on main switch.

The control is initialized.

The following menu appears:

–

Press the “OK”key.

–

Enter the corresponding number of the c lamping foot via keys “ñ”

or “ò”.

–

Press the “OK”key.

–

Press the “ESC”key

The screen changes over to the main menu.

Configuration